Answering Machine - Peaq PDP 170 Bedienungsanleitung

Pick up a call
The handset starts to ring during an incoming
external or internal call. The call symbol appears
in the display. The caller's number appears in
the display if your telephone line has Caller ID.
Consult your telephone company. The name
of the caller also appears on the display if:
• the number is stored into the
phonebook with name.
• the network transmits the name along
with the phone number.
1. To pick up a call:
• Press button
• Pick up the handset from the base
station (function only possible when
Auto call has been activated).
2. Press to finish the call or replace the
handset on the base station.
FORWARDING A CALL TO ANOTHER
HANDSET
You can forward an external call to the second
handset.
1. Push button
in display.
2. Choose the number of the other handset
to which you want to forward.
3. If the other handset answers you can first
talk internally.
4. Press button End call
forwarded to the other handset and your
handset finishes the call.
5. If the other handset does not answer push
"END" to talk back to the external caller.
CONFERENCE CALL BETWEEN TWO
HANDSETS AND ExTERNAL CALLER
You can make conference connection between
a external caller and a second handset.
1. Push button
in display.
2. Choose the number of the other handset
to which you want to forward.
3. If the other handset answers choose
"CONF".
IM_PDP170_150518_V05_HR.indb 35
to pick up the call.
. "INTERNAL" is shown
. The call is
. "INTERNAL" is shown
4. You are now connected with the second
handset and the external caller.
Hands-free
This function allows you to make a call without
having to hold the handset in your hand.
1. Press during a call to activate the
hands-free function.
2. Press again to deactivate.
Mute
Press during a call to mute the microphone.
You can talk without the caller hearing you.
Press again to switch on the microphone.

Answering machine

When putting the base station into initial
operation, the answering machine is preset
with a standardized welcome message. The
activated display at the base station shows
that the answering machine is activated.
RETRIEVE VOICE MESSAGES VIA
HANDSET
• New messages on the answering
machine are shown by text message
"New message: x" (x=number of new
messages) blinking below handset name.
• For playing new voice messages push
the left display button.
ENGLISH
35
18/5/15 11:29 AM