Power Supply; Install Batteries - Peaq PDP 270 Bedienungsanleitung

ENGLISH

Power supply

Base station
Connect the end of the power adaptor to the
DC input jack at the bottom of the base station
and the other to a power socket on the wall.
Mobile charging station
Place the mobile charging base on an even
surface and plug in.
34
IM_PDP270_150518_V03_HR.indb 34
Line connection
1. Connect one end of the line cord to the
telephone socket at the bottom of the
base station.
2. Connect the other end of the line to
telephone wall socket.
Depending on your country use one of the
provided adapters to connect the cord
with the telephone wall socket.

Install batteries

1. Open the battery compartment cover.
2. Insert the rechargeable batteries (provided)
in the correct polarity (+ and -).
3. Close the battery compartment.
18/5/15 11:36 AM