Remote Access - Peaq PDP 170 Bedienungsanleitung

ENGLISH
RETRIEVE VOICE MESSAGES VIA BASE
STATION
• The blinking display of base station shows
the number of new messages.
• For playing new messages directly push
button Play voice messages/Pause
• For deleting the message push button
Delete Voice message
Note:
The number of played messages which were
not deleted are permanently shown in display.

REMOTE ACCESS

You can operate your answering machine when
you are away from home. Simply make a call
to your phone with a phone using tone dialing
and enter your 3-digit PIN code.
1. Make a call to your home number with a
phone using tone dialing.
2. Push * twice after you heard the
announcement.
3. Enter your PIN code (factory setting: 000).
• You now have access to your
answering machine, and you can
now listen to the new messages.
4. Press a key to choose a function. See the
Remote access commands table below
for a list of available functions.
Key Function
1 Previous message
2 Play messages
3 Skip to next message
6 Stop playing
7 Delete current message
36
IM_PDP170_150518_V05_HR.indb 36
REMOTE CONFIGURATION OF
ANSWERING MACHINE
You can setup your answering machine when
you are away from home.
1. Make a call to your home number.
2. The answering machine is answering
your call.
3. Push *-button twice.
4. Enter your PIN code (factory setting: 000).
5. A signal tone appears and following
options are available:
.
.
If the answering machine is switched
1
off, in answer mode it will answer the call
after ringing min. 10 times. After pushing
*-button twice you can enter the PIN code
and switch on the answering machine.
Key Function
# Record voice message
0 Delete all messages
4 Play welcome message
5 Record new welcome message
6 Stop recording; stop playing
8 Turn off answering machine
9 Switch between welcome
m e s s a g e s ; S w i t c h o n
answering machine
1
18/5/15 11:29 AM