Peaq PDP 170 Bedienungsanleitung Seite 44

ENGLISH
ANSWER DELAY
• Set the number of rings after which the
answer machine will answer incoming
calls. Set a number between 2 and 9 rings
or choose setting "Toll Saver".
• Toll Saver mode: If there are no new
messages the answering machine will
answer calls after ringing 5 times. If new
messages are available incoming calls
will be answered after 2 times.
SECURITY CODE
Follow below instructions to change security
code of base station:
1. Enter the old 3-digit security code (factory
setting 000).
2. Confirm entry with right display button.
3. Enter a new 3-digit security code.
4. Confirm entry with right display button and
reenter code and confirm entry again. A
confirmation tone confirms the change.
Note: You will need this code for remotely
playing voice messages.
LANGUAGE
This option is for selecting the language of the
answering machine. Choose the language with
the navigation buttons
setting with right display button.
Organizer
Organizer
Calendar
Appointment
Stop Watch
Alarm
44
IM_PDP170_150518_V05_HR.indb 44
CALENDAR
When choosing this option a calendar will
be shown.
APPOINTMENT
Up to 5 appointments can be set. Choose an
appointment and push the right display button
to Edit or Delete an appointment.
➡ Title
➡ Date
➡ Time
DELETE APPOINTMENT
Select an appointment and confirm with the
right display button or push left display button
to cancel.
STOPPWATCH
To start the stopwatch push the right display
button and to stop the stopwatch push the
left display button.
•
•
and confirm the
The current function of display buttons is shown
in display.
ALARM CLOCK
The alarm clock can be set for modes Once,
Every Day, Mon-Fr). For turning off alarm
clock function select "Off".
1. Enter the time and confirm with the right
2. Select the alarm tone and confirm with
The alarm is activated at the preset time. Push
the left display button to stop the alarm. To
activate the 5 minutes snooze function push
the right display button.
With the left display button you can
stop the stopwatch or resume the
measurement.
If the measurement is stopped the time
can be reset by pushing the right display
button.
display button.
the right display button.
18/5/15 11:29 AM