Peaq PDP 170 Bedienungsanleitung Seite 38

ENGLISH
DATE AND TIME
For details information refer to SET DATE AND
TIME in chapter "First steps".
SET TIME FORMAT
For details information refer to SET DATE AND
TIME in chapter "First steps".
AUTO UPDATE
Switch on/off the automatically time updates.
PIN
To change the default PIN-codes or enter a
new code, follow the steps:
1. Enter the 4-digit default PIN (0000) and
confirm with the right display button.
2. Enter a new 4-digit PIN and confirm with
the right display button.
3. Repeat the new 4-digit PIN to confirm.
4. A beep sound will indicated the complete
setting.
DISPLAY
Contrast
Possible contrast settings are:
• Low
• Middle
• High
Backlight Time
Possible backlight time settings are: 10s, 20s,
30s or 40s
Name of Handset
To change the default handset name, proceed
as follow:
1. Press the left display button.
2. Enter a new name with the numeric
buttons. Toggle between upper and lower
case with the star button.
38
IM_PDP170_150518_V05_HR.indb 38
RESET HANDSET
Reset handset will only erase your custom
settings. Phonebook, Caller log and SMS will
not be reset.
• Press the right display button to reset.
Reset handset to default
Please note that all previous settings will be
deleted.
1. Press Flash button (
seconds.
2. Confirm with the right display button.
RESET BASE
Reset base will only erase your custom settings.
Phonebook, Caller log and SMS will not be
reset.
1. Confirm with the right display button.
2. Enter PIN.
RESET BASE TO DEFAULT
Please note that all settings will be erased
1. Press INT button for at least 10 seconds.
2. Confirm with the right display button.
Phonebook
NEW ENTRY
Phonebook
New Entry
Edit Entry
Show Details
Delete Entry
Delete All
Copy Entry
Name, phone number, ringtone and group will
be set in sequence.
) for least 10
18/5/15 11:29 AM