Searching A Station Manually: Manual Search - JVC kd-sx997r Bedienungsanleitung

Searching a station manually:
Manual search
1
Select the band (FM1 – 3, AM).
FM 1
(F1)
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.
2
Press and hold ¢
until "MANU" (manual) starts
flashing on the display.
3
Tune in to a station you want while
"MANU" (manual) is flashing.
To tune in to stations of lower frequencies
• If you release your finger from the button,
the manual mode will automatically turns
off after 5 seconds.
• If you hold down the button, the frequency
keeps changing (in 50 kHz intervals for
FM and 9 kHz for AM—MW/LW) until you
release the button.
10
Each time you press the
button, the band changes as
follows:
FM 2 FM 3 A M
(F2) (F3)
or 4
To tune in to stations
of higher frequencies
When an FM stereo broadcast is hard to
receive:
1
Press MODE to enter the
functions mode while listening
to an FM stereo broadcast.
"MODE" flashes on the upper
part of the display.
2
Press MO (monaural), while
"MODE" is still flashing on the
display, so that the MO
indicator lights up on the
display.
Each time you press the
button, the MO indicator lights
up and goes off alternately.
MO (monaural) indicator
When the MO indicator is lit on the display, the
sound you hear becomes monaural but the
reception will be improved.