Pioneer MVH-160UI Bedienungsanleitung Seite 3

Using this unit
Head unit
1 2 3 4 5
6 7 8 9 a b c
1 SRC/OFF
2
MULTI-CONTROL (M.C.)
3
(list)
4
DISP
5
USB port
(phone)
MVH-X360BT
6
iPod
MVH-160UI/MVH-16UI
7
BAND/ (iPod control)
8
(back)/DIMMER (dimmer)
9
c/d
a
1/ to 6/
b
AUX input jack (3.5 mm stereo jack)
c
Detach button
CAUTION
Use an optional Pioneer USB cable (CD-U50E)
to connect the USB storage device as any device
connected directly to the unit will protrude out
from the unit, which could be dangerous.
Display indication
2 5 7 9
1 3 4 6 8
a
b d
c
1 (list)
(iPod control)
2
This unit's iPod function is operated from
your iPod.
3
Sub information section
4
TA (traffic announcements)
5
TP (traffic program identification)
6
(sound retriever)
7 LOC (local seek tuning)
8 (repeat)
9
(random/shuffle)
(auto answer)
Only for MVH-X360BT
a
Shows when the automatic answering func-
tion is on.
Main information section
! Tuner: band and frequency
! RDS: program service name, PTY infor-
b
mation and other literal information
! USB storage device and iPod: elapsed
playback time and text information
(Bluetooth indicator)
c
Only for MVH-X360BT
d
Appears when a lower tier of folder or menu
exists.
Using this unit
Set up menu
1 After installation of this unit, turn the
ignition switch to ON.
SET UP appears.
2 Turn M.C. to switch to YES.
# If you do not use the unit for 30 seconds, the set
up menu will not be displayed.
# If you prefer not to set up at this time, turn M.C.
to switch to NO.
3 Press M.C. to select.
4 Follow these steps to set the menu.
To proceed to the next menu option, you need to
confirm your selection.
LANGUAGE (multi-language)
This unit can display the text information from a
compressed audio file even for information em-
bedded in English, Russian or Turkish.
! If the embedded language and the selected
language setting are not the same, text infor-
mation may not display properly.
! Some characters may not be displayed prop-
erly.
1 Turn M.C. to select the desired setting.
ENG (English)—РУС (Russian)—TUR (Turk-
ish)
2 Press M.C. to confirm the selection.
CLOCK SET (setting the clock)
1 Turn M.C. to adjust hour.
2 Press M.C. to select minute.
3 Turn M.C. to adjust minute.
4 Press M.C. to confirm the selection.
FM STEP (FM tuning step)
Use FM STEP to set FM tuning step options (seek
step settings).
1 Turn M.C. to select the FM tuning step.
100 (100 kHz)—50 (50 kHz)
2 Press M.C. to confirm the selection.
QUIT appears.
! The manual tuning step is fixed at 50 kHz.
! When AF and TA are turned off, the seek step
is fixed at 50 kHz even if set to 100.
5 To finish your settings, turn M.C. to select
YES.
# If you prefer to change your setting again, turn
M.C. to switch to NO.
6 Press M.C. to select.
Notes
! You can set up the menu options from the
system menu and initial menu. For details
about the settings, refer to System menu on
page 12 and Initial menu on page 13.
! You can cancel set up menu by pressing
SRC/OFF.
Basic operations
Important
! Handle the front panel with care when re-
moving or attaching it.
! Avoid subjecting the front panel to excessive
shock.
! Keep the front panel out of direct sunlight
and high temperatures.
! To avoid damaging the device or vehicle inte-
rior, remove any cables and devices attached
to the front panel before detaching it.
Section
02
3
En