Unit Description; Initial Use Of The Scale; Initial Use With The App - Beurer BF 800 Gebrauchsanweisung

5. Unit description

Front
1. Electrodes = conductive ITO* coating
2. Display
rear
3. Pairing button
4. Reset button
5. Battery compartment
*ITO (indium tin oxide): this innovative conductive coating acts as an electrode for the body
measurement.
Display
6. Bluetooth symbol for connection
®
between scale and smartphone
7a. Initials of the user, e.g. Tom
7b. Unknown measurements "
8. Body weight
9. Body data e.g. BMI, body fat etc.

6. Initial use of the scale

Inserting batteries
Remove the batteries from the protective packaging and insert the batteries into the scale ensuring that the
battery polarity is correct. If the scale does not function, remove the batteries completely and reinsert them.
setting up the scale
Place the scale on a firm level floor; a firm floor covering is required for correct
measurement. When using on carpet, affix the additional feet for carpet.

7. Initial use with the app

You must enter personal user parameters in order to measure your body fat percentage and other physical data.
The scale has 8 user memory locations which allows, for example, you and your family members to save
personal settings.
note: Keep the smartphone close to the scale in order to maintain an active Bluetooth
during initial use.
– activate Bluetooth
– Install "Beurer healthmanager" from the app store
– start the app and follow the instructions.
– select BF 800 in the app.
"
in the smartphone settings.
®
2
1
6
7a
15
3
pairing
reset
8
9
7b
connection
®
4
5
8