Epg / Time Reservation - AEG CTV 4859 Bedienungsanleitung

Display pictures
If you have selected the option „Photo" in the main
menu, you can display the pictures on your
connected USB carrier/smart card.
Select an image file by using the „▼" or „▲"
arrow buttons and press „ENTER".
In order to display a picture for some longer
time, press the „►II" button.
Press the „►" or „◄" buttons in order to
rotate the pictures clockwise/anticlockwise.
Press the „ g " button to return to the file
access mode.
Note: Take size into consideration when saving
your image files, as pictures that are too large
may be displayed either very slowly or not at all.
At best, the size of the pictures equal the size of
the picture format of the reproducer. Usally, the
size of TVs is 1024x576 pixels (aspect ratio 16:9)
or 768x576 (aspect ratio 4:3).
Please note that any conversion usally leads to
information loss with regard to the original format.
EPG (Electronic Programme Guide)
Your digital receiver is equipped with an electronic
programme guide. With this feature you can view
the programme information of one or more
programmes on the display. You can get an
overview on the currently running broadcasts or
on the broadcasts of the day.
The EPG features enable you to:
View information on programme contents on
the display
To preselect broadcast to be automatically
switched on when they start
To programme boadcasts
Note: This function can only be used if it is
supported by the selected station.
In order to display the Electronic Programme
Guide, press the „EPG" button.
The Electronic Programme Guide is displayed. On
the left side of the screen you will see the channel
list and on the right side the list of programmes.
Use the ◄, ►, ▼, ▲ arrow buttons to select
the desired programme/broadcast.
For information on the content of the chosen
programme, press the „YELLOW" button. A
new window is openend.
Press the „EXIT button in order to hide the
window.
19" TFT LCD TV CTV 4859 LCD/DVB-T

EPG / TIME RESERVATION

Note:
You can switch between the weekly and daily
display modes by using the „GREEN" and
„RED" buttons.
By using the „ " or „ " buttons you can
move forward/go backwards one day.
Preselection/programming of broadcasts:
Press the EPG button. The Programme
Overview window will be displayed.
Use the ◄, ►, ▼, ▲ arrow buttons to select
the desired programme/broadcast.
Press the „BLUE" button. A new window is
opened.
Press „ENTER" in oder to adopt the settings.
Press the „EXIT" button to return to the TV
programme.
If the start time of the seleced broadcast has
beeen reached, the device switches to this
broadcast/channel.
Note: To change the data predefined by the
channel (start/end time, etc.) select the
corresponding line using the "▼" and "▲" arrow
buttons.
15 EPG / Time Reservation
Time Reservation
The receiver can be programmed to switch to a
specific channel at the desired time. Furthermore,
you can programme the receiver in a way that it
switches on or off that a short message is
displayed at a specific time.
Set the timer as follows:
Select the „Configuration/Wakeup Timer"
submenu in the „Digital TV" menu.
By using the „▼" and „▲" arrow buttons you
selct the lines.
By using the „◄" and „►" arrow buttons you
carry out settings.
Select a free timer position in the line „Timer
No.".
Select the required option in the line „Timer
mode".
Select the required option in the line
„Wakeup Mode".
Select the required option in the line
„Wakeup Message". This menu option
depends on the Wakeup mode option.
Adjust the required date in the line „Wakeup
Date".
Press the „►" button. A calender is
displayed. Selected the required date by
using the arrow buttons.
Confirm your entry with „ENTER".
GB
61