Changing Time Settings - AEG CTV 4859 Bedienungsanleitung

19" TFT LCD TV CTV 4859 LCD/DVB-T
ABOUT THE DVB-T RECEIVER

Changing time settings

You can select between the „Auto" timer mode
and „Manual" timer mode menus in the
„Configuraton/Time" submenu.
„Auto" timer mode
If GMT is activated, select deviation from main
time (GMT) of your local time by adjusting it in the
"GMT offset" submenu.
Note: Switch on/off summer time in the „Summer
time" menu option.
„Manual" timer mode
If GMT is activated, select „Date" using the
„▼" or „▲" arrow buttons.
Using the „▼" or „▲, ◄" and „►" arrow
buttons to select the date and confirm your
selection with the „ENTER" button.
To set the correct time use the „▼" and „▲"
arrow buttons to select the menu item „Time".
Use the numeral buttons to set the current
time.
Press the „ENTER" button in order to save
your selection.
Operation
Basic operating steps
Switching between radio and TV mode
To switch between radio mode and TV mode,
press the „TV/RADIO" button.
Note: Radio programmes are not offerd in all
broadcast areas. Please ask programme
providers and in specialist shop for more
information.
Menu overview
Submenu Menu item / Description
Channel manager You can sort, group, edit and delete saves channels.
Installation Automatis channel search (local search), see page 57
Manual search, see page 57
Auto. Search, see page 57
Configuration You can change system setting of the device, see page 56
Software upgrade You can install new software by using a USB stick, if required.
Factory Default You can reset the device to the conditions as supplied, see page 57
Version Displays information on the receiver and installed software.
58
Selecting channel
To change to the previous or next channel
press the „▼" and „▲" arrow buttons.
You may also switch directly to a sation by
entering the memory space number of the
staion using the numerical buttons..
Volume
To increase or reduce the volume, press the
volume buttons „VOL+" and „VOL-".
To switch the sound off at the receiver, press
the „MUTE" button.
Note: With the „►/◄" arrow buttons you can also
adjust the volume. This will only change the
volume of the receiver. Important: The setting will
be stored by the device. With sound problems
make sure that the volume of the receiver is
adjusted to maxium!
User interface on the TV screen
You may carry out individual settings on your
receiver via the user interface menus. The user
interface is comprised of the main menu and its
sub-menus.
Press the „MENU" button.
A miniature view of the current station is displayed
on the right-hand side of the screen.
Select the desired sub-menu using the „▼" or
„▲" arrow buttons and press the "ENTER"
button.
The sub-menu is displayed.
Structure of the sub-menus
Top: Name of the menu
Left: Menu options
Right: Miniature view of the channel wich is set.