About The Dvb-T Receiver; Search And Edit Channels; Child Protection/Password (Pin Code); Factory Defaults - AEG CTV 4859 Bedienungsanleitung

Setting Options
Time
Wake up Timer
Parental Lock
12

About the DVB-T receiver

Search and edit channels

In order to quickly search a channel or to change
the features of saved channels, select the
"Installation" submenu.
Automatic channel search (Area search):
For an automatic search run, select the "Area
search" option.
Press the „ENTER" button".
All available channels will be searched and stored
in a programme slot.
Manual search:
The individual settings for a station can be carried
out in this menu. For this method, it is necessary
to know the searched- for programme's channel
number, frequency and bandwidth
For changing the settings, use „◄" and „►"
arrow buttons.
After carried out all settings, the search run is
activated by pressing the „ENTER" button.
All channels found in the area will be stored in a
programme slot.
Auto. Search:
In this menu, start and end frequency and band
width can be adjusted, in order to search for a
specific frequency band.
Select the different options by using the „▼"
or „▲" arrow buttons.
For change the settings, use the „◄" and „►"
arrow buttons.
After having carried out all settings, the
search run is activated by pressing the
„ENTER" button.
All channels found in the area will be stored in a
programme slot.

Child Protection/Password (PIN code)

In the „Parental Lock", you can carry out the
following settings:
Changing the password.
19" TFT LCD TV CTV 4859 LCD/DVB-T
ABOUT THE DVB-T RECEIVER
Explanation
Here you can set the time of the receiver (see, Change
time settings section.
Here, you can programme the timer or change/delete
existing programmes.
Here, you can change the pin code of the receiver. The
code preset by the factory is "0000".
Changing the password
You may chgange the password (PIN code) set in
the factory and enter any other four-digit number
as your personal PIN code. The password "0000"
has been pre-programmed in the factory.
Note: Note your new password; once changed,
only the new code is valid for all password
queries. If you've forgotten your personal
password, you can assign a new password by
means of the master password "8888".
Enter the old password (PIN) using the
numerical buttons.
Enter the new password using the numerical
buttons. The display will automatically
change to the menu item "New PIN".
Enter the new password again. The display
will automatically change to the menu item
"Confirm PIN".
The new password is integrated.

Factory defaults

The receiver is reset to ist conditions on delivery.
All of your settings and stored data are deleted.
Select the „Factory default" submenu in the
„Digital menu" by using the „▼" or „▲" arrow
buttons.
Press the „ENTER" button. You will be
prompted to confirm your selection.
If you want to reset the receiver to factory
setting, select „Yes" by using the „◄" and
„►" arrow buttons.
Select „No" if you want to exit the menu.
Confirm your selection with „ENTER".
The process may take a few minutes.
Press the „EXIT" button to return to the TV
channel.
GB
57