Changing The Picture Settings - AEG CTV 4889 DVB-T/DVD Bedienungsanleitung

English
56
Inputs on the side of the device
Switching on the player (Fig. 2/30)
05-CTV 4889_GB.indd 56 05-CTV 4889_GB.indd 56
USB Input (on the left-hand side of the device) (Fig. 2/32)
Insert a USB storage medium into the corresponding socket on the left-
hand side of the device.
Memory Card Slot (on the left-hand side of the device) (Fig. 2/31)
Insert an MMC/SD or MS storage card into the card slot on the left-hand
side of the device.
Turn on the main switch of the DVD player by moving the „POWER I/O"
switch on the left-hand side of the device to the „I" position.
Changing the Screen Settings
Press the LCD MENU button (Fig. 3/9) repeatedly in order to select the
individual menus (PICTURE, VOLUME, OPTION, SYSTEM, PRESET).
Use the ( / ) cursor buttons (Fig. 3/28) to select the option. Make the
adjustments with the cursor buttons ( / ).
Picture
In the „Picture" menu you can set the brightness, contrast, colour satu-
ration and OSD language. You can also use the „Reset" function to return
the settings to the default values.
Volume
Here you can set the volume.
Option
Here you can adjust the settings for the picture mode. Display screen
(„Normal" and „Down") as well as the zoom (16:9 and 4:3).
System
The „System" menu varies depending on the mode of operation. In DVB-T
and DVD mode it is not possible to make any adjustments. For the settings
available in analogue TV mode see the section „About the Analogue TV
Receiver".
Preset
This menu is only available in analogue TV mode (see the section „About
the Analogue TV Receiver").
08.09.2008 9:02:35 Uhr 08.09.2008 9:02:35 Uhr