Manual Adjustment; Electronic Adjustment - AEG FAVORIT 65050 I Benutzerinformation

German
degrees
(°dH)
4 - 10
< 4
1) Factory position.
2) Do not use salt at this level.
You must adjust the water soft-
ener manually and electronically.

Manual adjustment

Electronic adjustment

1. Press the on/off button to activate
the appliance.
2. Make sure that the appliance is in
setting mode. Refer to 'SETTING
AND STARTING A PROGRAMME'.
3. Press and hold Delay and Start at
the same time until the indicators (A),
(B) and (C) flash.
Water hardness
French mmol/l
degrees
(°fH)
7 - 18 0.7 - 1.8
< 7 < 0.7
Clarke
degrees
5 - 12
< 5
Turn the water hardness dial to the posi-
tion 1 or 2.
4. Press Program.
• The indicators (B) and (C) go off.
• The indicator (A) continues to flash.
• The display shows the setting of
the water softener. Example:
level 5.
5. Press Program again and again to
change the setting.
6. Deactivate the appliance to confirm.
ENGLISH
25
Water softener
adjustment
Manual Elec-
tronic
1 2
2) 2)
1 1
=