Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Con guring Network Settings
Note: Your TV's Network Settings include Wired
and Wireless Connection options. However, if your
TV does not have USB Wi-Fi dongle, you should
use Wired Connection type. If you try to connect via
Wireless Connection when your TV does not have a
USB Wi-Fi dongle, a warning screen will appear and
the TV will not get an IP address. Try connecting the
LAN cable after this and then the TV will be able to
get an IP address.
Con guring Wired Device Settings
•
On
Network Settings window you can set network
type of the TV set, which connects the TV to
the Internet. If you are connecting the TV via
ETHERNET INPUT, select Network Type as Wired
Device to con gure.
Setting Network Type
•
Network type can be selected as
device, in accordance with the active connection
to the TV set. Select this as Wired if you have
connected to the TV a LAN cable. Select as Wireless
if you connect via the wireless USB dongle.
Setting Con guration Status
•
This section displays the status of the connection.
Select Connected if you want to activate Wired or
Wireless connection. Select as Not Connected to
quit an active connection.
IP Address
•
If an active connection is available, the IP address
will be displayed on this section. If you want to
con gure IP address preferences, press YELLOW
button and switch to the advanced mode.
Con guring Wired Network Settings in
Advanced Mode
After pressing YELLOW button, Advanced mode will
be available. Press OK button to edit settings:
Con guring Other Settings
To view general con guration preferences, select
Other Settings in the Settings menu and press OK
button.
Operation
•
Press "
•
Use "
•
Press
Menu Timeout: Changes timeout duration for menu
screens.
Active Antenna: This feature enables or disables
the use of active antennas. When antenna power
Wired or Wireless
option is set as On, +5V will be transmitted to the
antenna output.
IMPORTANT: Antenna power should be Off when
standard antenna is used instead of the active
antenna.
Scan Encrypted: When this setting is on, search
process will locate the encrypted channels as well. If
it is set as Off, encrypted channels will not be located
in automatic search or manual search.
Blue Background: Activates or deactivates blue
background system when the signal is weak or
absent.
Software Upgrade: To ensure that your TV always
has the most update information, you can use this
setting. In order for the proper operation, please
ensure that the TV is set to standby mode.
English - 81 -
" or " " buttons to select an item.
" or " " button to set an option.
OK button to view a sub-menu.
Werbung
Kapitel
Inhaltsverzeichnis
