Scart Connection; Controlling Devices With Scart Using I/O Link.a - Pioneer KRL-32V Bedienungsanleitung

Connecting external devices

SCART connection

Example of connectable devices
E
Decoder
SCART cable
NOTE
• In cases when the decoder needs to receive a signal from the TV, make sure to select the appropriate input terminal to which
the decoder is connected in "Manual Adjust" in the "Analogue Setting" menu (Page 33).
• TV-VCR advanced AV Link systems may not be compatible with some external sources.
• You cannot connect the VCR with Decoder using a fully wired SCART cable when selecting "Y/C" under "INPUT2" in the
"Input Select" menu.

Controlling devices with SCART using i/o link.A

This TV incorporates four typical i/o link.A functions for smooth connections between the TV and other audiovisual
equipment.
One Touch Play
While the TV is in standby mode, it automatically turns on and plays back the image from the audiovisual source
(e.g. VCR, DVD player/recorder).
TV Standby
When the TV enters standby mode, the connected audiovisual equipment (e.g. VCR, DVD player/recorder) enters
standby mode as well.
WYSIWYR (What You See Is What You Record)
When the remote control unit of the connected VCR has the WYSIWYR button, you can automatically start
recording by pressing the WYSIWYR button.
Preset Download
Automatically transfers the channel preset information from the tuner on the TV to the one on the connected
audiovisual equipment (e.g. VCR) via the INPUT2 terminal.
NOTE
• Refer to the operation manuals of external equipment for details.
• The i/o link.A function works only when audiovisual equipment is connected to the INPUT2 terminal with a fully wired SCART
cable.
• The use of the i/o link.A function is only possible if the TV has enforced a complete auto installation with the connected
audiovisual equipment (Page 15, Initial auto installation).
The availability of the i/o link.A function depends on the audiovisual equipment used. Depending on the manufacturer and type
of equipment used, it is possible that the described functions may be completely or partially unusable.
Decoder
Example of connectable devices
E VCR E DVD player/recorder
E
When using the INPUT2 (SCART) terminal
If your VCR supports TV-VCR advanced AV Link
systems, you can connect the VCR using a fully wired
SCART cable.
SCART cable
VCR
SCART cable
Decoder
23