Inhaltsverzeichnis
Werbung
Problem
Three zeros flash in the
display.
The appliance is not in
operation. A cooking time
p
g
appears in the display.
The microwave does not work. The door is not properly
The food takes longer than
usual to heat up.
The turntable is making a
scratching or grinding noise.
Microwave operation is
cancelled for no obvious
reason.
Possible cause
Faulty control
Power cut
The rotary knob was
accidentally pressed.
Start was not pressed after
the setting had been made.
closed.
Start was not pressed.
The microwave setting is
too low.
You have placed a larger
amount of food than normal
in the appliance.
The food was colder than
usual.
There is dirt or a foreign
object in the area around
the turntable drive.
The microwave has a fault.
Repairs may only be carried out by fully trained
after sales service technicians. Incorrect repairs
may result in serious injury to the user.
Notes/remedial action
Switch the appliance off using the fuse
in the fuse box. Wait approximately
10 seconds and then switch it back on.
Reset the time.
Press the Stop button.
Press Start or clear the setting with
Stop.
Check whether leftover food or a foreign
object is trapped in the door.
Press Start.
Select a higher microwave setting.
Double the amount = double the
cooking time.
Stir or turn the food during cooking.
Clean the roller ring and recess in the
cooking compartment.
If this fault occurs repeatedly, please
call the after sales service.
61
Werbung
Kapitel
Inhaltsverzeichnis
