AEG Electrolux S 60240-28 KG Gebrauchsanweisung Seite 28

3. Slide the bottom door off the centre
hinge (H).
4. Remove the centre hinge and slide
the top door off pin (D); unscrew pin
(D) and refit it on the opposite side.
5. Remove the two plugs, to reveal the
holes for the hinge pivots, and
remount them on the other side.
6. Refit the top door and the centre
hinge (H) on the opposite side.
7. Refit the bottom door.
8. Refit bottom hinge (E) on the oppo-
site side, using the two screws pre-
viously removed.
9. Remove blanking cover (F) from ven-
tilation grille (D) by pushing it in the
direction of the arrow and refit it on
the opposite side.
10. Refit ventilation grille (D), clipping it
into place.
11. Unscrew the handle. Refit it on
opposite side after having pierced
the plugs with a punch. Cover the
holes left open with the plugs con-
tained in the documentation pack.
Attention:
After having reversed the opening
direction of the doors check that all
the screws are properly tightened
and that the magnetic seal adheres
to the cabinet. If the ambient tempe-
rature is cold (i.e. in Winter), the
gasket may not fit perfectly to the
cabinet. in that case, wait for the
natural fitting of the gasket or acce-
lerate this process by heating up the
part involved with a normal hairdrier.
28
D162/a
H
G