Service And Customer Care; Care & Cleaning - Kenwood CM020-Serie Anleitung

to make coffee
1 Lift the lid using the handle
the front of the coffee maker.
2 Fill the tank with the desired amount
of water. The water level must be
between the 2 and 6 cup marks.
Do not fill above the MAX level.
●
Use cold water. We recommend
using filtered water as it reduces
limescale and prolongs the life of
your coffee maker. Never use warm
or fizzy water.
3 Ensure the filter holder is positioned
correctly.
4 Fit either the permanent filter
supplied or a paper filter into the
filter holder. Add the coffee using
the spoon supplied (approximately
1 level spoon (7g) per cup to taste).
5 Close the lid and put the carafe on
the hotplate. NOTE: The lid
must be fitted to the carafe
in order to operate the anti-
drip valve.
6 Plug in and switch on.
7 Don't remove the carafe until
brewing has finished. When the
carafe is empty, switch off and
unplug the appliance.
The hot plate will keep your coffee
●
hot, but the sooner you drink it, the
better it will taste.
● If you have not used the appliance
for a while, run one full tank of
water (without coffee) through to
clean it out.
care & cleaning
●
Always switch off, unplug and allow
to cool before cleaning.
●
Don't wash parts in the dishwasher.
carafe and lid, filter holder
and permanent filter holder
●
Wash, then dry.
body
●
Wipe with a damp cloth, then dry.
Don't use abrasives - they'll scratch
the plastic and metal surfaces.
to descale
at 1 Buy a suitable descaler.
2 Descale the machine.
3 After descaling, run at least two full
tanks of water (without coffee)
through the coffee maker to clean it
out.
4 Wash the parts.
service and customer
care
●
If the cord is damaged it must, for
safety reasons, be replaced by
KENWOOD or an authorised
KENWOOD repairer.
If you need help with:
●
using your appliance or
●
servicing or repairs
Contact the shop where you bought
your appliance.
●
Designed and engineered by
Kenwood in the UK.
●
Made in China.
4