Basic Functions - Philips mz 33 Benutzerhandbuch

XP MZ-33 /22 01ENG 09-05-2000 09:32
CONNECTIONS
AUX IN
You can connect the audio left and right OUT terminals of
another sound system, e.g. CDR, cassette recorder to the
corresponding left and right AUX IN terminals at the rear of
the set.
• Use the MZ-33 sound controls to adjust the sound of the
other system.
• For playback of a connected CD-R(W), select the
CD-R(W) source.
LINE OUT (not for CDR-W)
You can connect the LINE IN terminal of a DAT or tape
recorder to the LINE OUT terminal at the rear of the set.
• Adjust the sound with the controls of the other system.
• When recording with a CD-R(W), select the CD source
on the MZ-33.
DIGITAL OUT (CD mode only)
You can connect the DIGITAL IN terminal of a CD-R(W) or
an external DAC player to the DIGITAL OUT terminal at
the rear of the set.
• When recording with a CD-R(W), select the CD source
on the MZ-33.
• For playback of a connected CD-R(W), select the
CD-R(W) source.
6
Pagina 6
MZ-33 / 22 page 6

BASIC FUNCTIONS

MZ 3 COMP
ACT AUDIO
IO IO
IO IO SYST EM
IO IO
II II CD
DBB
SHUFFLE
IO IO PROGRA M
II II
IO IO
II II
IO IO
II II
IO IO
IO IO
I II I II
Switching on
There are 3 ways to switch the set on:
• press y STANDBY/ ON on the set and the last selected
source switches on;
• press SELECT SOURCE on the set and the last selected
source switches on;
• press CD, TUNER, CDR or AUX on the remote control.
To switch the set to standby, press y STANDBY/ ON once
on the set (y on the remote control).
– The volume level, interactive sound settings, last
selected source and tuner presets will be retained in the
set's memory.
DIGITAL
out
R L
LINE out
Adjusting volume and sound
1 Turn the VOLUME control anti-clockwise to decrease or
clockwise to increase volume on the set (or press
VOLUME –, + on the remote control).
™ Display shows the volume level VOL and a number
OPEN OPEN
CLOSE CLOSE
from 0-32.
PRESET PRESET
2 Press DBB, INCR.SURR or DSC on the remote control
once or more to select the desired sound effects:
TUNING TUNING
,
DBB
and
(no indication)
OPTIMAL /CLASSIC
( ) ... .
/POP /OPTIMAL
Notes:
– The effect of INCREDIBLE SURROUND may vary with
different types of music.
– You can also select the desired sound effects from the
set (See Using the SOUND CONTROL)
3 Press MUTE on the remote control to interrupt sound
reproduction instantly.
– Playback will be continued without sound and the
display shows MUTE.
4 To activate sound reproduction you can:
– press MUTE again;
– adjust the volume controls;
– change source.
( ) ( )
/JAZZ