Basic Functions; Switching To Standby; Demonstration Mode; Loading The Cdc And Cdr - Philips FW-R55 Bedienungsanleitung

Basic functions

CD CHANG E
STAN DBY • ON
ECO POW ER
DIS PLA Y/ RDS

Switching to standby

To switch the set on press 2 STANDBY·ON on the set.
To switch the set to standby press 2 STANDBY·ON
again.
The set is switched to standby and the time is displayed.
To switch the set to eco-standby press ECO POWER
on the set (or 2 on the remote control for 3 seconds).

Demonstration mode

The demonstration mode displays various features of the
set and will start automatically.
To cancel the demonstration mode keep Ç on the
set pressed for at least 5 seconds.
The demo mode is cancelled permanently.The set
switches to standby.
14

Loading the CDC and CDR

OPEN • CLOSE
Important!
Therefore, do not use any accessories such as disc
stabilizer rings or CD treatment sheets, etc. as offered
on the market, because they may cause jamming of
the changer mechanism.
tray.
1
CD changer: Press OPEN·CLOSE to open the
ON • OFF
LEVEL
CD changer drawer.
AUX
CD recorder: Press / CDR OPEN·CLOSE to open the
CD recorder drawer.
Note: Opening the CD changer or CD recorder clears any
program.
2
CD changer: You can load up to 3 discs. Insert a disc
(printed side up) in the right tray.
0 0
0 0
CD recorder: Insert a disc (printed side up) in the tray.
3
CD changer: Press OPEN·CLOSE again to close the drawer.
CD recorder: Press / CDR OPEN·CLOSE to close the drawer.
MP3-CD only:
1) This system is designed for regular CD(RW)s.
2) Do not load more than one disc into one disc
OPEN CHANGER is displayed, the drawer is opened and
the tray rotates once.
OPEN CDR is displayed and the drawer is opened.
You can load another disc in the left tray.
To insert a third disc press CD CHANGE on the set.
The CD carousel will rotate once.
The drawer is closed and READING is displayed.
CD, the disc tray number, the total number of tracks and
the total playing time of the disc in the last selected tray
are displayed.
The drawer is closed and READING is displayed.
If an unfinalized disc is loaded, INITIALIZING will be
displayed.
CDR, the total number of tracks and the total playing
time of the disc are displayed.
READING MP3 is displayed.
The first album name is displayed.
3 is shown.
MP