Editing A Recorded Minidisc - Sharp SD-NX10H Bedienungsanleitung

Titling a MiniDisc (continued)
To change a character:
Example) To change "LAVE" to "LOVE"
1 Perform steps 1- 3 in the "Creating disc and track names" section on page 41.
2 Press the REC LEVEL/CURSOR
character to be changed.
3 Press the TIMER/DELETE button.
4 Enter a new character.
5 Press the ENTER button.
ENGLISH
E-43
or button on the remote control to flash the

Editing a Recorded MiniDisc

To divide a track
1
Play the track which you want to divide into two, and press the MD
button at the point where you want to divide the track.
2
Press the NAME/TOC EDIT button, and within 10 seconds, select
"DIVIDE" by pressing the REC LEVEL/CURSOR
3
Within 10 seconds, press the ENTER button.


To cancel the operation, press the NAME/TOC EDIT button.
4
Press the ENTER button again.


The track is divided, and the unit is stopped at the beginning of the second of the
two tracks.


The numbers of the tracks which come after the divided track are automatically
increased by one.
Notes:


If you divide a track that has a name and the date of recording, the two new tracks
will have the same name and the date of recording.


However, if there is not enough space to memorise the characters in "TOC", the
second track will not be named.


Each disc can hold up to 255 tracks. However, even if the number of assigned
tracks has not reached 254, it might not be possible to make any further divisions
of tracks.
or button.