Aerial Connection - Sharp SD-NX10H Bedienungsanleitung

Left speaker
Wall socket
(AC 230V, 50 Hz)

Aerial connection

Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS socket and position the FM aerial
wire in the direction where the strongest signal can be received.
Supplied AM loop aerial:
Connect the AM loop aerial wire to the AM and GND terminals. Position the AM loop
aerial for optimum reception. Place the AM loop aerial on a shelf, etc., or attach it to
a stand or wall with screws (not supplied).
Black
Note:
Keep the FM/AM aerial away from the amplifier unit, MD/CD/tuner unit, AC power
lead, and speaker lead. If they are too close, the noise may be heard.
Installing the AM loop aerial:
< Assembling >
White
< Attaching to the wall >
Wall
Screws
ENGLISH
E-12