Adjusting The Recording Level - Sharp SD-NX10H Bedienungsanleitung

Recording on the top position of a recorded
MiniDisc
1
Prepare for recording.
To record from a CD:
Load the desired CD and a recordable
MiniDisc.
2
Press the TOP POSITION button.
One more press will cancel the top position mode.
3
Start recording.
To record from a CD:
Press the HIGH or NORMAL button.
When the recording is finished, the top position mode will be cancelled.
The recorded track will be the first track on the MiniDisc.
All the tracks previously recorded will be renumbered.
Note:


Whilst in the pause mode or recording, the top position mode cannot be set or can-
celled.
To record from the radio:
Tune in to the desired station and load
a recordable MiniDisc.
To record from the radio:
Press the MD button after pressing
the REC button.

Adjusting the recording level

You can adjust the recording level depending on the recording source by watching the
level meter.
1
Press the CD button.
2
Press the or button to select the desired track.
3
Press the REC MODE button to select the recording mode.
4
Press the CD button to start playback.
5
Press the REC button to pause recording.
6
Press the REC LEVEL/CURSOR
ing level.
0dB
Level meter


Maximum level should not exceed "0dB".


The recording level can be adjusted in 2dB intervals between - 4dB and +10dB.


At this time, you can adjust the recording level with the
7
Press the CD button.
8
Press the or button again to select the desired track to be
recorded.
9
Press the CD button again to start recording.
To stop recording:
Press the MD button.
The MiniDisc will stop.
The CD will continue playback.
or button to adjust the record-
-4dB ··· +10dB
Recording level
or button.
ENGLISH
E-38