Herunterladen Inhalt Inhalt Diese Seite drucken

Tunze Nano Wavebox 6206 Gebrauchsanleitung Seite 85

Vorschau ausblenden Andere Handbücher für Nano Wavebox 6206:
Inhaltsverzeichnis

Werbung

Failure: The Wavebox pump does not operate
when the photo-electric cell has been connected.
Cause: The photo-electric cell is located outside
of the illumination beam or is not illuminated
sufficiently.
Remedy: Chose a new position for the photo-
electric cell and re-attach (cf. Wavecontroller
7091).
Failure: The Wavebox is not operational; pump
is not operational.
Cause: The pump has been blocked mechanically.
Remedy: Disassemble the pump (cf. chapter titled
"Annual servicing"); remove any foreign bodies
or clean the pump drive unit (cf. chapter titled
"Disassembly of the drive unit"), and replace, if
and when required.
Disfonctionnements: La Wavebox ne pulse pas
lorsque la cellule photo est raccordée.
Raisons: La cellule photo se retrouve en dehors
du cône de lumière ou n'est pas assez éclairée.
Solutions: Choisissez un nouvel emplacement
ou re-fixez la cellule photo (voir Wavecontroller
7091).
Disfonctionnements: La Wavebox ne fonctionne
pas, pompe hors service.
Raisons: La pompe est bloquée mécaniquement.
Solutions: Démontez la pompe (voir Entretien
annuel), extrayez le corps étranger ou nettoyez
l'entrainement de la pompe (voir Démontage de
la pompe), remplacez si nécessaire.
85

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Wavebox 6215Wavebox extension 6215.50

Inhaltsverzeichnis