Herunterladen Inhalt Inhalt Diese Seite drucken

Initial Operation With Multicontroller - Tunze Nano Wavebox 6206 Gebrauchsanleitung

Vorschau ausblenden Andere Handbücher für Nano Wavebox 6206:
Inhaltsverzeichnis

Werbung

Initial operation with Multicontroller

TUNZE® Nano Wavebox / Wavebox can also be
integrated in an aquarium with Turbelle® pumps.
The circular current of the Turbelle® and the
washing of the waves produced by the Wavebox
complement each other and result in a strongly
pulsating circular current (reef top biotopes). The
Multicontroller can be set with or without pulse
operation.
Principle
The „Slave" cable of the Wavecontroller is connected
to one of the two channels on the Multicontroller (1);
the internal jumper is set to „External" (cf. the chapter
on „Functions of the Wavecontroller / jumper). The
Multicontroller should be operated in „Interval 1"
mode with an ideal time intervals of six hours
(high and low tide). With one circulation pump and
one Wavebox, the tank is provided with six hours
of circular current (2) and six hours of washing of
waves (3) With two pumps and one Wavebox, the
tank is provided with six hours of circular current
without waves (4) and six hours of circular current
in another direction with the washing of waves (5).
Mise en service avec Multicontroller
TUNZE® Nano Wavebox / Wavebox s'intègrent
aussi dans un système de brassage par pompes
Turbelle®. Le brassage circulaire des pompes
Turbelle® et la houle générée par Nano Wavebox
/ Wavebox se complètent pour générer un puissant
brassage circulaire pulsé (conditions de biotopes
« platier récifal »). Le Multicontroller est utilisable
avec ou sans génération de houle.
Principe
Le câble « Slave » se branche sur l'un des
canaux de sortie du Multicontroller (1), jumper
du Wavecontroller sur « Extern » (voir Fonctions
du Wavecontroller / Jumper). Nous conseillons
l'utilisation du Multicontroller en mode « interval 1 »
avec une durée optimale des intervalles de 6 heures
(flux et reflux). En utilisant une pompe de brassage
+ Nano Wavebox / Wavebox, le bac connaîtra 6
heures de brassage circulaire (2) et 6 heures de
houle (3). Avec deux pompes + Wavebox, le bac
connaîtra 6 heures de brassage circulaire sans
houle (5) et 6 heures avec houle (4).
59

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Wavebox 6215Wavebox extension 6215.50

Inhaltsverzeichnis