Quick Start / Connection - Adam Sub7 Bedienungsanleitung

Before connecting the subwoofers to your audio components and the
power source make sure that both the subwoofer and your audio system
are switched off and set the level controls fully counterclockwise.
a)
Input
Connect the left and right line-level signal from
your signal source (preamplifier, mixer, etc.) to
the LEFT and RIGHT INPUT jacks. Use either
XLR (balanced) or RCA (unbalanced) cables. In
most professional applications XLR will be the
best choice, while RCA is more common in HiFi
applications.
Satellite Out
b)
Connect the LEFT and RIGHT SATELLITE OUT
jacks to the inputs of the left and right main
powered speakers or the inputs of the amps
powering the main speakers.
c) Check if the specified voltage matches the voltage of the power supply you
use. If this is not the case do not connect the subwoofers to a power source!
Please contact your local dealer or national distributor.
If the voltages match, use the included power cables to connect the subwoofer
to the AC sockets.
Switch on the main on/off switches on the back panel of the subwoofers.
d)
Switch on your audio system and adjust the volume of both the audio system
e)
and the subwoofer carefully.
6
4.
Quick Start / Connection
fig. 2: Inputs
fig. 3: Outputs