Herunterladen Inhalt Inhalt Diese Seite drucken
Vorschau ausblenden Andere Handbücher für Sub2100:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Sub2100
Active Subwoofer
Owner's Manual / Bedienungsanleitung
English / deutsch

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für Adam Sub2100

  • Seite 1 Sub2100 Active Subwoofer Owner‘s Manual / Bedienungsanleitung English / deutsch...
  • Seite 2: Inhaltsverzeichnis

    Table of contents Introduction ........3 Safety Instructions ......4 Important information for set up ..5 Quick Start / Connection ....6 Subwoofer placement ....7 Controls .........8 Troubleshooting ......9 Maintenance ........10 Transport / Package ......10 Environmental Information .....10 EU Declaration of Conformity ..11 Limited Warranty ......12 12.1 Terms and Conditions ....12 12.2 How to claim ........12 Technical Data .......13...
  • Seite 3: Introduction

    ADAM subwooofers are built for maximum quality reproduction and audio perfection. With the Sub2100 you have selected a powerful and precise tool that allows you to both evaluate and enjoy audio recordings. It meets highest expectations in sound quality and craftsmanship. The Sub2100 is one of the most powerful subwoofers available. The combination of its 21” driver with a 6” voice coil and an exuberant 1000 watts (RMS) of amplification sets a new subwoofer-benchmark. This manual is intended to provide you with information about your new ADAM. It contains important information regarding safety, setting up,...
  • Seite 4: Safety Instructions

    Safety Instructions Please read the following safety instructions before operating this product. Keep the instructions for future reference. Please heed the warnings and follow the instructions. Caution: To reduce the risk of electric shock, do not open the subwoofer. There are no user- serviceable parts inside. Please refer service issues to qualified service personnel. This product, as well as all attached extension cords, must be terminated with an earth ground three-conductor AC mains power cord like the one supplied with the product. To prevent shock hazard, all three components must always be used. Always switch off your entire system before connecting or disconnecting any cables, or when cleaning any components. Do not use this apparatus near water. Do not expose this product to rain or moisture, never wet the inside with any liquid and never pour or spill liquids directly onto this unit. Please do not put any objects filled with liquids (e.g. vases, etc.) onto the speaker. Always use fully checked cables. Defective cables can harm your speakers — and yourself! Also, they are a common source for any kind of noise, hum, crackling etc. Never expose this product to extremely high or low temperatures. Never operate this product in an explosive atmosphere.
  • Seite 5: Important Information For Set Up

    Information for Set Up Important information for set up Acclimation: After having unpacked your subwoofer, please allow the system to acclimate to the temperature of the room for approximately an hour. Solid stand: It is important to ensure the subwoofer sits firmly on a solid surface! Transportation/packaging: We recommend that you retain the original packaging, as it is the best way to guarantee safe transportation should the need to do so arise. Break-in time: Please note that the subwoofers will take some break-in time to achieve optimum sonic performance. Danger from high SPLs: Exposure to high sound pressure levels may cause permanent hearing loss! Please do not get close to the subwoofers when using them at high volumes.
  • Seite 6: Quick Start / Connection

    Quick Start / Connection Before connecting the subwoofers to your audio components and the power source make sure that both the subwoofer and your audio system are switched off and set the level controls fully counterclockwise. Input Connect the left and right line-level signal from your signal source (preamplifier, mixer, etc.) to the LEFT and RIGHT INPUT jacks. Use either XLR (balanced) or RCA (unbalanced) cables. In most professional applications XLR will be the...
  • Seite 7: Subwoofer Placement

    Subwoofer Placement It is common knowledge that low frequencies (below about 100Hz) are non- directional, meaning they can hardly be located by the listener. It is, however, a common misunderstanding that therefore the placement of a subwoofer does not matter. It does matter. Due to the fact that every room (geometry, furniture, etc.) is unique, the fol- lowing descriptions intend to be a first introduction to the subject. The aim is to assist you tackling the most common problems with subwoofers and room acoustics, notably interference and standing waves. Distance to satellites In most set ups it is advisable to place the subwoofer not too far from the satellites to minimize the chance of Interferences. Interference means the superposition of two or more waves resulting in an attenuation/cancellation or enhancement of the specific frequency/frequencies. Furthermore, big refelexion faces in close range of the subwoofer should be avoided if possible. Walls/Distance to walls Generally, every wall in relative close distance to the subwoofer enhances its sound pressure by about 6 dB. For instance, placing the subwoofer in a corner of a room will make it about 18 dB louder. It is likely that this will result in an impairment of the precision of the musical reproduction.
  • Seite 8: Controls

    Controls Sub Level (Volume) Input Sensitivity control from -60 dB to +6 dB relative to 775 mV when used via the symmetrical XLR input or relative to 250 mV when used via the asymmetrical Cinch (RCA) input. fig. 4: Sub Level Sub Filter (Frequency): The upper frequency limit of the unit is variable and can be set to any value between 50 and 150Hz. The 85Hz marker indicates the recommendation of Dolby® labs for surround sound settings. In many cases, a slightly lower crossover frequency delivers tighter bass response, for typical near- midfield monitors we recommend 70 -75Hz as upper limit. fig.
  • Seite 9: Troubleshooting

    Troubleshooting ADAM products are designed and manufactured to the highest quality stan- dards. However, if any problems with your subwoofer occur, we recommend to proceed as follows: Problem: The unit does not work. • Please check the connection between the source of power (socket) and the AC jack. • Check if the subwoofer is switched on. • Make sure the electric circuit works. Problem: The LED shows normal operation (green) but there is either no or only a distorted audio signal. • Check the volumes of both the subwoofer and your signal source. • Check the wiring. Is the cable defective? Are all cables connected cor- rectly? If possible, check with new cables. • Connect the subwoofer as directly to the signal source as possible (please mind the volume!). Is another part of the signal path (e.g. mixer,...
  • Seite 10: Maintenance

    Please make sure that no liquids get inside the cabinet. Do not spray any fluids on the sub. Do not use a wet cloth for cleaning. Do not use flammable or acidly chemicals for cleaning. Do not touch the membranes of the subwoofers. We recommend using a lint-free, damp cloth for cleaning. The subwoofer membranes may be dusted using a very soft brush. Transport / Package In case you have to send your speakers to any other location, it is of vital importance that you use the original packaging materials. Experience has shown that it is very difficult to avoid damage if you have to send them with- out these. ADAM Audio can not be held responsible for damages due to im- proper packaging. If a transport is necessary and the original package is no more available, a new one can be purchased from ADAM Audio. Environmental Information All ADAM products comply with international directives on the Restriction of Hazardous Substances (RoHS) in electrical / electronical equipment and the disposal of Waste Electrical / Electronic Equipment (WEEE). For disposal, please consult your local authorities for further information.
  • Seite 11: Eu Declaration Of Conformity

    EU Declaration of Conformity ADAM Audio GmbH whose registered office is situated at Ederstr. 16, 12059 Berlin, Germany declare under our sole responsibility that the product: Sub2100 complies with the EU Electro-Magnetic Compatibility (EMC) Directive 89/336/EEC, in pursuance of which the following standards have been ap- plied: EN 61000-6-1 : 2001 EN 61000-6-3 : 2001 EN 55020 : 2002 EN 55013 : 2001 and complies with the EU General Product Safety 2001/95/EC, in pursuance of which the following standard has been applied: EN 60065 : 2002. This declaration attests that the manufacturing process quality control and product documentation accord with the need to assure continued compli- ance.
  • Seite 12: Limited Warranty

    12.2 How to claim repairs under warranty Should service be required, please contact the ADAM Audio dealer where the product has been purchased. If the equipment is being used outside the country of purchase, the interna- tional shipping costs have to be paid for by the owner of the product. Service may be supplied by your ADAM Audio national distributor in the coun- try of residence. In this case, the service costs have to be paid for by the owner of the product whereas the costs for parts to be repaired or replaced are free of charge. Please visit our website to get the contact details of your local distributor. To validate your warranty, you will need a copy of your original sales invoice with the date of purchase.
  • Seite 13: Technical Data

    Technical Data Sub2100. Active Subwoofer Woofer 543 mm / 21.5“ Voice coil ø 150 mm / 6“ Cone material paper Amp. power RMS / music 1000 W / 1200 W Frequ. response 18 Hz - 150 Hz THD > 60Hz ≤ 1 % SPL max in 1m ≥ 128 dB Crossover frequencies 50 - 150 Hz Input connectors XLR / RCA Input impedance 10 kΩ 85 kg / 187.4 lb Weight Magnetical shielding 850 x 600 x 705 mm Height x Width x Depth 33.5“ x 23.6“ x 28“...
  • Seite 14 Notes...
  • Seite 15 Sub2100 Aktiver Subwoofer Bedienungsanleitung deutsch...
  • Seite 16 Inhalt Einleitung ..........17 Sicherheitshinweise ........18 Hinweise zur Inbetriebnahme ....19 Schnellstart / Anschluss ......20 Aufstellung ..........21 Bedienelemente ........22 Problembehebung ........23 Wartung und Pflege .........24 Transport / Verpackung ......24 Umweltinformation ........24 Konformitätsbescheinigung .....25 Garantie ..........26 12.1 Garantiebedingungen ......26 12.2 Inanspruchnahme ........26 Technischen Daten ........27...
  • Seite 17: Einleitung

    Einleitung Sehr verehrte Kundin, sehr verehrter Kunde, wir gratulieren Ihnen zu Ihrer Entscheidung für ein Produkt aus dem Hause ADAM Professional Audio! Sie haben ein hochwertiges Aktivsystem erwor- ben, das sowohl zur zuverlässigen Beurteilung von Tonaufnahmen als auch für bestmögliche Wiedergabequalität entworfen und gefertigt worden ist. Mit dem Sub2100 haben Sie einen Subwoofer der Superlative gewählt: Die Kombination aus einem riesigen 543mm-Tieftöner, der 50mm-Schwingspule und satten 1000 Watt (RMS) Verstärkerleisung setzet einen neuen Maßstab im Bereich der Subwoofer. Bitte lesen Sie diese Bedienungsanleitung vor der Inbetriebnahme und beachten Sie die Sicherheitshinweise und Garantiebestimmungen.
  • Seite 18: Sicherheitshinweise

    Sicherheitshinweise Bitte beachten Sie die folgenden Sicherheitshinweise, bevor Sie Ihre neuen Lautsprecher in Betrieb nehmen. Bewahren Sie diese Hinweise an einem sicheren Ort auf für ein späteres Nachschlagen. Achtung: Öffnen Sie die Monitore nicht. Gefahr eines Stromschlages! Es befinden sich keine wartungsbedürftigen Teile im Gehäuseinnern. Wartungen im Inneren des Lautsprechers und Reperaturen dürfen nur durch Fachpersonal vorgenommen werden.
  • Seite 19: Hinweise Zur Inbetriebnahme

    Hinweise zur Inbetriebnahme Allgemeine Hinweise zur Inbetriebnahme Akklimatisierung: Nach dem Auspacken und der Aufstellung des Subwoofers sollte dieser ca. eine Stunde unangeschlossen ‚ruhen’, um sich der jeweiligen Raumtempera- tur anpassen zu können. Sicherer Stand: Der Subwoofer muss ohne zu wackeln auf einer festen Unterlage stehen! Transport: Wir empfehlen, beim Auspacken der Teile Ihres neuen Subwoofers darauf zu achten, die Verpackung nicht zu beschädigen und aufzubewahren, um den Subwoofer bei Bedarf sicher transportieren zu können (siehe 9.). Einspielzeit: Beachten Sie, dass dieser Subwoofer, abhängig von Pegel und Nutzungsfre- quenz, einige Tage benötigt, um seine optimale Klangqualität zu erreichen. Gefahr durch hohe Lautstärken: Zu hohe Lautstärken können ihr Gehör schädigen! Vermeiden Sie direkte Nähe zu Lautsprechern, die mit hohen Pegeln betrieben werden.
  • Seite 20: Schnellstart / Anschluss

    Schnellstart / Anschluss Vergewissern Sie sich vor Anschluss der Kabel, dass sowohl die Subwoofer (Netzschalter) als auch die betreffenden Komponenten Ihrer Audio-Anlage ausgeschaltet sind und stellen Sie die Lautstärke auf Minimum. Input (Eingänge) Schließen Sie das rechte und linke Signal von ihrer Signalquelle (Vorverstärker, Mischkonsole, etc.) an die LEFT und RIGHT Eingangsbuchsen an. Benutzen sie entweder XLR (balanced) oder RCA (unbalanced) Kabel. Innerhalb der meisten professionellen Anwendungen wird XLR die Abb. 2: Inputs beste Wahl sein; RCA hingegen ist häufig im HiFi-Bereich anzutreffen.
  • Seite 21: Aufstellung

    Empfehlungen zur Aufstellung Bekannt ist, dass tiefe Frequenzen (unterhalb von ca. 100 Hz) vom menschlichen Ohr schwer ortbar sind. Das bedeutet aber nicht, dass die Platzierung eines Subwoofers im Raum bedeutungslos wäre. Da nahezu jeder Raum in Maßen und Möblierung von allen anderen abweicht, können die folgenden Ausführungen nur einführende Hinweise darstellen. Sie sollen eine erste Orientierung ermöglichen, um häufig auftretende Probleme mit Subwoofern erkennen und bekämpfen zu können.
  • Seite 22: Bedienelemente

    Empfehlung der Dolby®-Laboratorien für Surround Sound Wiedergabe entspricht. Abb. 5: Wenn möglich schicken Sie das Signal zunächst in den Verstärker Sub Filter des Sub2100 und von dort in die Satelliten. Die Möglichkeit den Baßanteil von diesen Lautsprechern fernzuhalten führt in der Regel zu einer besseren Qualität der Wiedergabe. Wenn Sie die Frequenz verändern, ist es ratsam, auszuprobieren, ob eine Phasenumschaltung klanglich sinnvoll ist.
  • Seite 23: Problembehebung

    Fehlerbehebung Alle ADAM Produkte werden nach höchsten Qualitätsstandarts gefertigt. Sollte wider Erwarten dennoch ein Problem auftauchen, empfehlen wir, zunächst folgende Maßnahmen durchzuführen: Das Gerät funktioniert nicht/kein Strom • Überprüfen Sie zunächst, ob die Verbindung zwischen der Stromquelle und Netzeingang des Gerätes gestört ist. • Überprüfen Sie dann, ob das Gerät eingeschaltet ist. • Stellen Sie sicher, dass der Stromkreis der Steckdose funktioniert. Die LED zeigt normalen Betrieb an (grün), es wird aber kein oder nur ein gestörtes Signal ausgegeben:...
  • Seite 24: Wartung Und Pflege

    Für Schäden, die von unzureichenden Verpackungsmaßnahmen herrühren, kann ADAM Audio nicht haftbar gemacht werden. Sollte für einen Transport die Originalverpackung nicht mehr zur Verfügung stehen, kann eine neue von ADAM Audio kostenpflichtig erworben werden. Umweltinformation Alle ADAM Produkte entsprechen den internationalen Richtlinien bezüglich der Beschränkung der Verwendung bestimmter gefährlicher Stoffe in Elek- tro- und Elektronikgeräten (RoHS) und über Elektro- und Elektronik-Altgeräte (WEEE). Die Produkte müssen entsprechend diesen Richtlinien recycelt bzw. entsorgt werden. Für nähere Auskünfte erkundigen Sie sich bitte bei Ihrer örtlichen Entsorgungsstelle.
  • Seite 25: Konformitätsbescheinigung

    Konformitätsbescheinigung Wir, die ADAM Audio GmbH mit dem eingetragenen Firmensitz in der Ederstr. 16, 12059 Berlin, Deutschland, erklären hiermit eigenverantwortlich, dass das Produkt Sub2100 den folgenden Normen entspricht: EN 61000-6-1 : 2001 EN 61000-6-3 : 2001 EN 55020 : 2002 EN 55013 : 2001 Ebenfalls stimmt es überein mit der EU General Product Safety 2001/95/EC, und richtet sich nach folgendem Standard: EN 60065 : 2002. Diese Erklärung bezeugt, dass die Qualitätskontrolle und Produktdokumenta- tion mit der Notwendigkeit fortlaufender Einhaltung der EU-Direktiven über- einstimmt. Ausgestellt in Berlin, April 2006. Gezeichnet: Roland Stenz Geschäftsführer ADAM Audio...
  • Seite 26: Garantie

    Garantie Die ADAM Audio GmbH gewährt auf Ihre aktiven Subwoofer eine beschränk- te Garantie von 5 Jahren. Alle Produkte werden nach den höchsten Qualitätsstandards entwickelt und hergestellt. Sollte ein Produkt wider Erwarten dennoch Mängel aufweisen, gelten folgende Bedigungen für die Inanspruchnahme der Garantie: 12.1 Garantiebedingungen Die Garantie beinhaltet die Reparatur und gegebenenfalls den Ersatz von Einzelteilen oder des Gerätes sowie den Rücktransport innerhalb des Lan- des, in dem das Gerät gekauft worden ist.
  • Seite 27: Technischen Daten

    Technische Daten Technische Daten Sub2100 Tieftönergröße 543 mm / 21.5“ Schwingspule ø 150 mm / 6“ Tieftöner Membranmaterial Papier Eingebaute Verstärker 1000 W / 1200 W Frequenzgang 18 - 150 Hz THD > 60 Hz ≤ 1% Max. Peak Schalldruck in 1m pro Paar ≥128 dB SPL Übergangsfrequenz 50 - 150 Hz Eingangsbuchsen XLR / RCA Eingangsimpedanz 10 kΩ Gewicht 85 kg Magnetisch geschirmt nein 850 x 600 x 705 mm Höhe x Breite x Tiefe 33.5“ x 23.5“ x 28“ Garantie 5 Jahre...
  • Seite 28 ADAM Audio GmbH ADAM Audio UK Ltd. Ederstr. 16 email: uk-info@adam-audio.com 12059 Berlin GERMANY ADAM Audio USA Inc. email: usa-info@adam-audio.com tel: +49 30-863 00 97-0 ADAM Audio China fax: +49 30-863 00 97-7 www.adam-audio.com email: info@adam-audio.com email: sales@adam-audio-china.com...

Inhaltsverzeichnis