Emc Regulations - Kröber O2-4.0 Gebrauchsanweisung

Kröber O2-4.0
Appendix
11 Appendix

11.1 EMC regulations

11.1.1 Electromagnetic compatibility, interference emission
The Kröber O2 4.0 is intended for use in an environment as described below. The operator of the
Kröber O2 4.0 must make sure that the unit is operated in such an environment.
Measurement of interference
emission
HF emissions acc. to
CISPR 11
HF emissions acc. to
CISPR 11
Emission of harmonics acc. to
IEC 61000-3-2
Emission of voltage
fluctuations/flickers acc. to IEC
61000-3-3
Table 2: Electromagnetic compatibility, interference emission
92
Regulations and declaration of manufacturer -
Electromagnetic compatibility, interference emission
Compatibility
Group 1
Class B
Class A
compatible
Electromagnetic environment
- regulations
The Kröber O2 4.0 uses HF energy
solely for its own function. The HF
emission is therefore very low and
any interference with adjacent
electronic equipment is very
unlikely.
The Kröber O2 4.0 is intended for
use in all facilities, including living
quarters and other environments
that are connected to the public
supply network, which also
supplies buildings used for the
purpose of living.