Kröber O2-4.0 Gebrauchsanweisung Seite 76

Kröber O2-4.0
Taking into service
7.3.2 With external humidification
If the unit does not need to stand next to the user, the installation is carried out as follows:
Fig. 40: Mains lead
Fig. 41: Adapter for ext. humidification
Fig. 42: Oxygen outlet connector
76
1 Insert the mains lead into a
professionally grounded socket.
ATTENTION!
The Kröber O2 4.0 is only
designed for operation on a 230
Volt, 50Hz mains network.
2 Screw the angle connection to the
oxygen outlet of the Kröber O2 4.0 with
a wrench (metric size 17).
3 Connect the oxygen outlet
connector.