AUDIOLINE DECT 8848 Bedienungsanleitung Seite 41

Key lock
Incoming calls can still be taken in the normal way even with the key lock activated.
3 sec *
2 x *
Temporary tone dialling
Even if you can only operate the telephone using pulse dialling, you can switch to tone
dialling temporarily during a call in order, for example, to access an answering machine.
*
*
23
Dialling pause
When the phone is integrated in a private branch exchange, it is necessary to dial a speci-
fic number (e.g. 0 or 9) in order to obtain the dialling tone for an outside line. In the case of
older exchanges, it can take some time until the dialling tone can be heard. Insert a dial-
ling pause in such cases.
The pause can also be entered with the phone numbers in the phone book.
0, 2 sec P, 1234...
Ringing melody
The ringing melody of the handset and/or base station can be deactivated . Page 50.
In the event of an incoming call no ringing is heard.
Locating the handset (Paging)
If you have mislaid the handset, it can be located easily by means of an acoustic signal.
‘ {í}
‘ or ë
Range
The handset has a range of approx. 50 meters indoors and approx. 300 meters outdoors.
When the connection to the base station is good, the l icon appears in the display. If the
handset is moved too far from the base station, the l icon flashes and acoustic warning
signals are issued. Move nearer to the base station, otherwise the call will be disconnec-
ted.
Activate the key lock function
Deactivate the key lock function
22
Activate temporary tone dialling
Deactivate temporary tone dialling
Insert the pause
Activate the acoustic signal to locate the handset
Stop the acoustic signal
Telephoning
41