Installation - Klarstein 10031386 Bedienungsanleitung

Hints on Installation
• The customer should have a qualified power supply coincident with that printed on the tag of the air con-
ditioner.
• Must use special circuit and efficient grounding outlet matching with the plug of the air conditioner.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
• The plug should be easily accessible after installation.
• If the fuse of unit on PCB is broken, please change it with the type of F3.15A/250V.
References to the Location
• Install the mobile air conditioner in a flat and spacious location where the air outlets will not be obstructed.
• A minimum clearance of 50cm from walls or other obstacles should be kept.
• The gradient can't be more than 10 degrees with the horizontal plane while putting and using the utensil
• The air conditioner shall not be used in the laundry.
• The plug shall be accessible after the unit is positioned.
Duct Mount Instruction
Put the side of duct to the exhaust air outlet of mobile air
1 conditioner. Fix it with unit correspondingly, then turn right.
Push it downwards, make sure that it is fixed thoroughly.
2 Put the other side of the duct to adaptor.
19

Installation