12 Disposal
Disposal of the individual components
should be separated by materials (materials
see below), circuit boards with electronic
components and travel sensor placed in
electronics scrap.
TURN
13 Returns
Clean the electrical position indicator.
G
Request a goods return declaration form
G
from GEMÜ.
Returns must be made with a completed
G
declaration of return.
If not completed, GEMÜ cannot process
credits or
repair work
but will dispose of the goods at the
operator's expense.
Note for returns:
Legal regulations for the protection
of the environment and personnel
require that the completed and
signed goods return declaration
is included with the dispatch
documents. Returned goods can
be processed only when this
declaration is completed.
1235, 1236
14 Information
PP
Seals
EPDM
PVDF
PVDF / st. st.
Shoud there be any doubts or
PEEK / st. st.
misunderstandings in the preceding text,
PEEK / st. st.
the German version of this document is the
PP
authoritative document!
St. st.
PP
42 / 44
Note:
Handling, assembly,
commissioning, connection
and adjustments may only be
carried out by authorised trained
personnel. The manufacturer shall
assume no liability whatsoever
for damages caused by improper
handling or third-party actions. In
case of doubt contact us before
commissioning.
Note on staff training:
Please contact us at the address
on the last page for staff training
information.