Threading The Upper Thread - Silvercrest IAN 100137 Bedienungs- Und Sicherheitshinweise

Threading the upper thread

1
2
4
1
A
3
5
2 3
Important:
Set the main switch (20) to ("O").
h
Raise the presser foot bar by lifting the
two-step presser foot lifter (18) and lift
the thread lever (1) by turning the
hand wheel (21) anti-clockwise. Follow
the arrows and numbers on the
sewing machine when threading.
1. Place the felt
thread spool pin (15)
of thread
pin (15).
2. Guide the upper thread through the
upper thread guide (16) from right to
left, then move it forward into the right
slot and guide it downwards.
3. Guide it to the left under the guide lug
(A) and then upwards again.
4. Guide the thread from right to left
through the thread lever (1) and then
downwards.
5. Guide the thread first behind the large,
metal thread guide (B) and then
through the eye of the needle. Always
thread the needle from the front.
B
Needle threader
You can use the needle threader (f) as a
threading aid.
1. Insert the needle threader (f) through
the eye of the needle from back to
front.
2. Guide the upper thread through the
wire loop of the needle threader.
3. Pull the needle threader (f) together
with the thread back through the eye of
the needle.
Getting ready
cushion (h) on the left
. Place the spool
(m) on the same thread
GB / IE
spool
79