VEGA VEGAPULS 68 Betriebsanleitung Seite 77

FF desciptor
FALSE_SIGNAL_CMD_CON-
FIGURATION2
ECP_CURVE_AVARAGING_
CONFIG
LEVEL_ECHO_MEASURE-
MENT
ECHO_CURVE_STATUS
PACKET_COUNT
GU_ID_END
ECHO_CURVE_READ
ECHO_EVALUATOR
ECHO_DECIDER
DISPLAY_SETTINGS
SIL_MODE
EDENVELOPE_CURVE_FIL-
TER
EDDETECTION_CURVE_FIL-
TER
EDECHO_COMBINATION
LIN_TABLE_A ... LIN_
TABLE_Q
ELECTRONICS_INFORMA-
TION
APPLICATION_CONFIG_
SERVICE
LEVEL_ECHO_INFO
DEVICE_STATUS
FALSE_SIGNAL_LIMITS
USER_PEAK_ELEC_TEMP
USER_MIN_MAX_PHYSI-
CAL_VALUE
RESET_PEAK_PHYSICAL_
VALUE
RESET_LINEARIZATION_
CURVE
DEVICE_STATUS_ASCII
ECHO_CURVE_PLICSCOM_
REQUEST
VEGAPULS 68 • Foundation Fieldbus
Description
Gradient of the manual sectors, safety at the end of false echo
memory and depending on the import range gating out the fal-
se signals
Averaging factor on increasing and decreasing amplitude
Function measured value filter
Echo curve data
Echo parameters, first large echo, amplitude threshold first lar-
ge echo
Echo selection criteria, fault signal on loss of echo, delay on
fault signal on loss of echo
Indication value, menu language, lightning
Parameters of envelope curve filter, activation of smooth raw
value curve
Parameters of the detection filter, offset threshold value curve
Parameters for echo combination, function combine echoes,
amplitude difference of combined echoes, position difference of
combined echoes
32 couples of percentage and lin. percentage values
Electronics version
Limitation measuring range begin, safety of measuring ran-
ge end
Level echo ID, amplitude, measurement safety
Device status
False signal distance min./max.
Min.-/max.- values of electronics temperature, date
Min.-/max.- distance values, date
Device status
Parameters as curve selection and resolution
11 Anhang
Unit
77