Installation; Rear Spacers - Electrolux SK23113 Benutzerhandbuch

8. INSTALLATION

WARNING!
Read the "Safety Information"
carefully for your safety and cor-
rect operation of the appliance
before installing the appliance.
8.1 Positioning
This appliance can be installed in a dry,
well ventilated indoor, also in a garage or
cellar, but for optimum performance install
this appliance at a location where the am-
bient temperature corresponds to the cli-

8.2 Rear spacers

8.3 Levelling
2
1
3
4
mate class indicated on the rating plate of
the appliance:
Cli- Ambient temperature
mate
class
SN +10°C to + 32°C
N +16°C to + 32°C
ST +16°C to + 38°C
T +16°C to + 43°C
You can find the two spacers in the bag
with documentation.
Do these steps to install the spacers:
1.
Release the screw.
2. Engage the spacer below the screw.
3. Turn the spacer to the right position.
4. Tighten again the screws.
When placing the appliance ensure that it
stands level. This can be achieved by two
adjustable feet at the bottom in front.
ENGLISH 67