Inhaltsverzeichnis
Werbung
13. If one of the following situations arises, get the equipment
checked by a service personnel:
a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d. The equipment has not work well or you can not get it work
according to the user's manual.
e. The equipment has dropped und damaged.
f.
When the equipment has obvious sign of breakage.
14. Do not leave this equipment in an environment unconditioned,
storage temperature above 60°C (140°F), it may damage the
equipment.
15. The unit can be operated at an ambient temperature of max. 35°C.
16. The sound pressure level at the operators position according to
IEC 704-1: 1982 is equal or less than 70 dB(A).
17. Power Cord Requirements
The power cord set used with the AC adaptor must meet the
requirements of the country where you use the AC adaptor,
whether it is 100-120 or 200-240 V AC. The following
Information explains the requirements for power cord set selection.
!
The cord set must be approved for the country in which it is
used.
!
The appliance coupler must have a configuration for mating
with a CEE22/EN6032/IEC 320 appliance inlet.
A.
For U.S. und Canada:
!
The cord set must be UL Listed und CSA Certified.
!
The minimum specifications for the flexible cord are No. 18
AWG.
B.
For Japan:
!
All components of the cord set must bear a " T " mark und
registration number in accordance with the Japanese Dentori
Law.
!
The minimum specifications for the flexible cord are .75m ㎡ ㎡ ㎡ ㎡
conductors.
viii
Werbung
Inhaltsverzeichnis
