WolfVision VZ-C12 Bedienungsanleitung Seite 7

Mount both stabilization brackets with the enclosed hex safety screws loosely into the corresponding
screw threads (fig. 6). Don't tighten the screws yet.
Now move the Ceiling Visualizer into unreleased position (fig. 7). Pull and turn the security mechanism
counter-clockwise to release it.
Move the Visualizer into the desired position (fig. 8). Once the position has been found, release the
Visualizer (fig. 9) and tighten the hex safety screws to prevent the unit from detaching and moving
(fig. 10).
All required cables can now be pulled through the opening of the ceiling mount and connected (fig. 11).
Move the Visualizer back into the unreleased position (fig. 12). Pull and turn the security mechanism
counter-clockwise to release it.
Make sure that the folding mechanism is completely closed. You will hear a "click" sound when it is
completely closed. (fig. 13).
Fig.11
Fig.8
Fig.9
Fig.12
Fig.6
security lock
mechanism
5
Fig.7
security lock
mechanism
Fig.10
Fig.13