Replacing The Interior Light Bulb; Defects Finding Guide - Beko HS218540 Handbuch

EN

Replacing the interior light bulb

If the lamp burns out, disconnect the
appliance from the mains. Take out the
lamp trim. Make sure the lamp is
screwed correctly. Plug in the appliance
again. If the lamp still does not go on,
replace it with another one model E14 -
15W . Mount back the lamp trim in its
place.
Defects fi ndi ng gui de
The appliance does not work.

There is a power failure.

The plug of the supply cord is not inserted
well into the socket.

The fuse is blown.
The thermostat is in „OFF" position.

The temperatures are not low enough(red
LED on).
 The food prevents the door closing.

The appliance was not placed correctly.

The appliance is placed too close to a heat
source.

The thermostat knob is not in the correct
position.
Excessive ice build-up
The door was not closed properly.

The inside lighting does not work

The lamp is blown. Unplug the appliance
from the mains, take out the lamp and
replace it with a new one.
The following are not defects
Possible noddings and cracks coming

from the product: circulation of the
refrigerant in the system.
N o i s e s d u r i n g o p e r a t i o n
In order to keep the temperature at the value
you have adjusted, the compressor of the
appliance starts periodically.
The noises which can be heard in such
situation are normal.
They are redced as soon as the appliance
reaches the operation temperature.
The humming noise is made by the
compressor. It can become a little stronger
when the compressor starts.
The bubbling and gurgling noises coming from
the refrigerant circulating in the pipes of the
appliance, are normal operating noises.
Warning !
Never try to repair yourself the appliance or its
electric components. Any repair made by an
unauthorised person is dangerous for the user
and can result in the warranty cancellation.
7
Instruction for use