Changing Of The Hinge Position - Pkm KS 215.0 A++ EB2 Bedienungsanleitung

3.3 Changing of the hinge position

WARNING! Switch off and unplug the appliance before changing the
hinge position. RISK OF ELECTRIC SHOCK!
CAUTION! The change of the hinge position must be carried out by
at least two persons; otherwise you may hurt yourself or damage the
appliance. Do not tilt the appliance more than 45
NOTICE! Empty the appliance before. Set the adjustable feet to their
highest position.
NOTICE! Adjust the door properly. The seal must close properly.
Tools required:
Philips screwdriver, flat head screwdriver, hexagonal spanner
1. Unscrew the bottom hinge. Remove the door
carefully. Store the door at a place, where it
cannot be scratched.
2. Move the bottom hinge pin from the right to
the left side.
3. Unscrew the top hinge pin. Rotate the hinge and reinstall the hinge pin.
4. Insert the door. Then install the top hinge on
the left side. Check that the door is adjusted
properly and the door seals close properly
before you finally tighten the screws of the top
hinge.
0
.
31