Preparation; Things To Be Done For Energy Saving - Grundig GKM 16825 X Bedienungsanleitung

4

Preparation

4.1 Things to be done for
energy saving
A
Connecting the product to electric
energy saving systems is risky as it may
cause damage on the product.
• Do not leave the doors of your refrigerator
open for a long time.When doors are
open,warm air enters the fridge/freezer
cabinets and the appliance consumes more
energy to cool down the foodstuffs.
• Do not put hot food or drinks in your
refrigerator.
• Do not overload the refrigerator. Cooling
capacity will fall when the air circulation
inside is hindered.
• Do not place the refrigerator in places
subject to direct sunlight. Install the
product at least 30 cm away from heat
sources such as hobs, ovens, heater cores
and stoves and at least 5 cm away from
electrical ovens.
• Pay attention to store your food in
refrigerator in closed containers.
• You can load maximum amount of food to
the freezer compartment of the refrigerator
by removing the freezer compartment
drawers. Declared energy consumption
value of the refrigerator was determined
with the freezer compartment drawers
removed,except top compartment flap and
bottom drawer and with maximum amount
of food loaded. There is no risk in using a
shelf or drawer suitable for the shapes and
sizes of the foods to be frozen.
• Thawing frozen food in fridge
compartment will both provide energy
saving and preserve the food quality.
C
The ambient temperature of the room
where you install the refrigerator should
at least be -15°C. Operating your
refrigerator under colder conditions
than this is not recommended.
C
Inside of your refrigerator must be
cleaned thoroughly.
12 / 20 EN
Refrigerator /User Manual Refrigerator /User Manual