Main Components - SOLAC SP7150 Gebrauchsanleitung

MAIN COMPONENTS

1. Air intake cover
2. Dryer body
3. Cold air button
4. On/Off and airflow control button (2 positions)
5. Temperature selector (3 positions)
6. Air concentrator
7. Air diffuser
8. Hanger
9. Non-slip stops
10. Round brush with ceramic coating and ionic teeth (only SP7155)
11. Flat brush with ceramic coating and ionic teeth (only SP7155)
USER INSTRUCTIONS
• Make sure your hands are completely dry before plugging in the appli-
ance.
• Plug the appliance into the mains and set the airflow regulator (4) to the
desired position:
- Position -: light airflow
- Position =: strong airflow
• Set the temperature selector (5) to one of the following positions:
- Low temperature (-)
- Medium temperature (=)
- High temperature (≡)
• When your hair is dry, set the button (4) to the off position 0.
USING THE CONCENTRATOR 6
• The air concentrator (6) enables you to point the airflow at a specific
point.
• Use of the concentrator (6) is recommended for drying or styling localized
areas of your hair, especially when using a comb or curlers.
USING THE DIFFUSER 7
• After removing excess water with the dryer, apply styling mousse all over
your hair.
• Fit the diffuser (7) to the dryer.
• Tilt your head to one side and hold the dryer-diffuser upwards. Start drying
from the back, since this area takes longer to dry than the front.
(Fig.1)
9