Operation - Texas Razor 4600 Li Bedienungsanleitung

GB Original instructions
Illustrations ................................................................... 2
Warning symbols .......................................................... 7
Safety ......................................................................... 13
Identification of the parts ............................................ 13
Mounting .................................................................... 14
Battery ........................................................................ 14
Charging..................................................................... 14

Operation ................................................................... 15

Blade .......................................................................... 15
Storage and maintenance .......................................... 15
Specifications ............................................................. 16
Warranty terms and conditions ................................... 16
CE Certificate of conformity ........................................ 21
Safety
Setup
Do not put hands or feet near or under rotating
parts.
Read this manual carefully. Make sure that you are
familiar with the different controls, settings and
handles of the equipment.
Know how to stop the unit and ensure that you are
familiar with emergency stop.
Never allow children or people unfamiliar with
these instructions to use the machine. Note, that
local regulations can restrict the age of the
operator.
If you feel unwell, tired or have consumed alcohol
or drugs, do not operate the machine.
Always inspect the machine before usage Ensure
that no parts are worn or damaged.
Replace worn out or damaged elements and bolts
in sets to preserve balance.
The operator of the machine is responsible for
people's safety.
Never use the machine near children or animals.
The operator of the machine is held liable for any
accidents or hazards to other people and their
property.
Thoroughly inspect the area, where the equipment
is to be used, if necessary remove any foreign
objects.
Boots with non-slip soles with steel jacket is
required. Avoid loose-fitting clothes.
Operation
After striking a foreign object, stop the engine
immediately and inspect the machine thoroughly
for damage. Repair the damage before continuing.
If the machine should start to vibrate abnormally,
stop the engine and check immediately for the
cause. Vibration is generally a warning of damage.
Always turn off the engine and ensure that all
moving parts have come to a complete stop before
making any repairs, adjustments, or inspections.
Exercise extreme caution when operating on
slopes.
Never operate the machine at a fast pace.
Do not overload machine capacity by attempting to
push at too fast a rate.
Do not carry passengers.
Never allow any bystanders in front of unit.
Only operate the machine at daylight or in fully
illuminated areas.
Ensure a stable foothold and always keep a firm
hold on the handles. Always walk, never run.
Do not operate the machine when barefoot or
wearing sandals.
Exercise extreme caution when changing direction
on slopes
Never attempt to make any adjustments, while the
engine is running.
Use extreme caution when reversing or pulling the
machine backwards
Due to vibrations from the handle, long time use
can result in white fingers.
If fatigue is felt in arms, hands or fingers – or visible
signs of white fingers is appearing, the work should
be stopped immediately, and a sufficient time of
break should be taken for recovery. To avoid white
fingers, each user should operate the machine for
no more than 1.5 hours per day.
Maintenance and storage
The engine shall be stopped when carrying out
maintenance and cleaning operations, when
changing tools and when being transported by
means other than under its own power.
Check regularly that all bolts and nuts are
tightened. Retighten if necessary.
The engine must be completely cooled before
storing indoors or covered.
If the machine unused for a period of time, please
refer to the instructions in this manual.
Maintain or replace safety and instruction labels, as
necessary.
Only use orginal spare parts or accessories. If not
orginal parts or accessories is used, the liablility is
no longer applied.
Miscellaneous
Factory-fitted control devices, such as the handle-
mounted clutch cable, must not be removed or
exposed.
Ensure that the machine is properly secured when
transported on a flatbed etc.
Waste electrical products must not be
disposed of with the household waste. This
tool should be taken to your local recycling
centre for safe treatment.
The lawnmower is manufactured according to the latest
safety requirements. These include a blade brake that
stops the motor and blade in 3 seconds when the blade
brake. Every precaution is only effective when it is
followed exactly. Use the following description when
you mount your lawnmower.
Identification of the parts
See Illustration 1
A. Handlebar for engine brake
B. Start button
C. Wing nut
D. Rear discharge guard with spacer blocks
E. Battery cover
F. Motor
G. Indicator lid
H. Grass collector
I. Height adjustment
J. Side discharge guard
13