Kerbl topTEMP Betriebsanleitung Seite 11

EN: Operation Manual
LCD
Measuring Procedures
It is very important that probe tip be placed in the right location, as inst-
ructed and illustrated on illustrated.
1. Turn on the thermometer by pressing the button.
2. LCD will show some characters as illustrated below.
3. Wait for 2 beeper sounds and the unit is now ready to use.
4. In selecting the °C or °F value by pressing the button for 2
Seconds when °C or °F symbol is fl ashing.
< 32,0°C (89,6°F)
> 42,0°C (107,60°F)
1. Do not measure when the temperature is not stable.
The normal mode will be auto-changed immediately.
2. Short circuit / breakdown
3. Temperature over 50.0°C (122.0°F)
Power for Operation Indicator
Lower Battery Indicator
11