Problem Chart; Cleaning And Maintenance; Technical Specifications - Futurelight CP-256 MST Bedienungsanleitung

All DATA from controller to pendrive
Select this menu and press ENTER. The controller will ask to file name, you have to give. After giving name
press ENTER. The copy process will start, and takes about 8 minutes. Under process the controller can not
be switched off!
We can offer you to save all data to pendrive or pc after you made a show. Maybe later to visit the same
place you can simply load the data and you are ready to make a show.

7. PROBLEM CHART

PROBLEM:
No power.
Cannot enter main menu.
The color or gobo cannot
be saved in the Preset
Macro.
The program cannot be
edited.
The individual scenes are
not displayed when editing
a program.

8. CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.

9. TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
Number of control-channels:
Sound-control:
Sound-input:
Audio-sensitivity:
DMX 512-output:
Free chasers:
Dimensions (LxWxH):
Minimum mounting depth:
Weight:
Please note: Every information is subject to change without prior notice. 17.12.2007 ©
CAUSE:
The power unit is not connected.
Forgot code or wrong input.
The controller could not save the
settings.
The last scene has not been saved.
The Recall-button has not been
pressed.
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
230 V AC, 50 Hz ~
via 12-15 V DC, 500 mA power unit included in the delivery
6 W
512
either via ¼" Jack or built-in microphone
¼" stereo Jack
0.3 - 1 V
3-pin XLR-connector
64
483 x 132 x 83 mm
19" mounting dimensions with 4 u
90 mm
3,6 kg
Check the connection cable of the
power unit and any extension-cables.
Open the envelope with the Master
Code and follow the instructions.
Please enter the settings again and
save every projector individually.
Check if all scenes of the program are
available. Edit the program again and
save the last scene by pressing the
Enter-button.
Press the Recall-button in order to
display the saved scene.
62/62
REMEDY:
00031823.DOC, Version 1.0