Electrolux WAGL6S200 Benutzerhandbuch Seite 7

B
• The default spin speed of the programme.
• 'No Spin' 1)
C • The display symbols.
Symbols
D • The programme time
When the programme starts, the time decreases with steps of 1 minute.
• The delay start
When you press the delay start button, the display shows the delay start time.
• Alarm codes
If the appliance has a malfunction, the display shows alarm codes. Refer to 'Troubleshoot-
ing' chapter.
• Err
The display shows this message for some seconds if:
– You set a function that is not applicable for the programme.
– You change the programme while it operates.
The indicator of the Start/Pause button
•
When the programme is completed.
1) Only available for Spin/Drain programme.
2) The symbols appear on the display when the related phase or function is set.
START/PAUSE BUTTON
4
Press button to start or interrupt a pro-
gramme.
DELAY START BUTTON
5
Press button to delay the start of a pro-
gramme from 30 minutes to 20 hours.
TIME SAVE BUTTON
6
Press the button
gramme duration.
• Press one time to set 'Shortened dura-
tion' for items with daily soil.
• Press two times to set 'Extra Quick' for
items with almost no soil.
and 'Rinse Hold' symbols.
2)
Description
Washing phase
Rinse phases
Spin phase
Child lock
You cannot open the appliance door when the symbol is on.
You can open the door only when the symbol goes off.
If the programme is completed but the symbol stays on:
• There is water in the drum.
• The 'Rinse Hold' function is on.
Delay start
4
5
6
to decrease the pro-
4
flashes.
Some programmes accept only one of
the two functions.
EXTRA RINSE BUTTON
7
Press button to add rinsing phases to a
programme.
Use this function for persons allergic to de-
tergents and in areas where the water is
soft.
STAIN BUTTON
8
Press button to add the stain phase to a
programme.
Use this function for laundry with hard
stains to remove.
electrolux 7
7
8