Control Board - EuroLite LED TMH-21.i Twin Bedienungsanleitung

Control Board

The Control Board offers several features: you can simply set the starting address or run the pre-
programmed program.
The main menu is accessed by pressing Menu until the display is lit. Browse through the menu by pressing
Menu. Press Enter in order to select the desired menu. You can change the selection by pressing Up or
Down. Press Enter in order to confirm. You can leave every mode by pressing Menu. The functions provided
are described in the following sections.
Addr A001 – A512
17CH
CH
24CH
PAn No / Yes
tilt No / Yes
til2 No / Yes
Play Auto/Soun/DnCo
No / Yes
dISP
dlnd No / Yes
SENE 005-255
MAn CH01-CH24
rESt No / Yes
Addr
With this function, you can adjust the desired DMX-address via the Control Board.
CH
With this function you can set the DMX channel mode via the Control Board.
PAn
With this function you can reverse the PAN-movement.
tilt/til2
With this function you can reverse the TILT-movement.
Play
Auto - With this function, you can run the internal program.
Soun - With this function, you can run the internal program sound-controlled.
Dnco - DMX mode - This mode allows the unit to be controlled via every standard DMX controller.
dISP
With this function you can flip the display by 180° for a better view when the fixture is hung from the truss or
a ceiling.
dlnd
With this function, you can adjust the display characteristics when the buttons are inactive:
No - Display always on.
Yes - Shuts off the display after 30 seconds
SENE
With this function, you can select the desired microphone sensitivity.
MAn
With this function, you can adjust each channel manually.
rESt
With this function you can reset the device via the Control Board.
DMX address setting
Setting DMX channel mode
Reverse movement
Auto program / music control / DMX
mode
Display reverse 180 degree
Display turn off
Mic sensitivity
CH01 = XXX ... CH24 =XXX
Manual adjustment
Reset
29/31 00092157, Version 1.2