Motor Protection Filter - Philips FC9179 Bedienungsanleitung

English
12

Motor protection filter

To guarantee optimal performance, replace the motor protection filter
once a year.
1 Remove the dustbag holder with the dustbag.
2 Press the filter holder release tab (1) and take the filter holder out
of the appliance (2). Take the motor protection filter out of the
filter holder.
3 Put the new filter in the filter holder. Fit the two lugs of the filter
holder behind the ridge at the bottom to ensure that it fits properly
at the top (1). Then press home the filter holder ('click') (2).
4 Place the dustbag holder with the dustbag back into the appliance.
HEPA 13 filter
The HEPA 13 filter is able to remove 99.95% of all particles down to
0.0003mm in size from the outlet air. This not only includes normal house
dust, but also harmful microscopic vermin such as dust mites and their
excrements, which are well-known causes of respiratory allergies.
Note: To guarantee optimal dust retention and performance of the vacuum
cleaner, always replace the HEPA filter every 2 years with an original Philips
filter of the correct type (see chapter 'Ordering accessories'). You can dispose of
the old filter with the normal household waste.
Replacing the HEPA 13 filter
1 Open the filter grille.