Control Panel Description; Electronic Programmer - Bauknecht EMVD 7163 Benutzerhandbuch

INSERTING WIRE SHELVES AND OTHER ACCESSORIES IN THE OVEN
The wire shelf and other accessories are provided with a locking mechanism to prevent their unintentional removal.
Fig. 1
1. Insert the wire shelf horizontally, with the raised part "A" upwards (fig. 1).
2. Angle the wire shelf when it reaches the locking position "B" (fig. 2).
Fig. 2
3. Return the wire shelf to the horizontal position and push it in fully to "C" (fig. 3).
4. To remove the wire shelf proceed in reverse order.
The other accessories, like the drip tray and baking tray, are inserted in exactly the same way. The protrusion on the flat surface
enables the accessories to lock in place.

CONTROL PANEL DESCRIPTION

ELECTRONIC PROGRAMMER

4 5
1. FUNCTION SELECTOR KNOB: On/off and function selector knob
2. BROWSE KNOB: for browsing the menu and adjusting pre-set values
3. SELECTION/CONFIRMATION BUTTON
N.B.: the display shows
4. CONTROL KNOB FOR FRONT LEFT HOTPLATE
5. CONTROL KNOB FOR REAR LEFT HOTPLATE
6. CONTROL KNOB FOR REAR RIGHT HOTPLATE
7. CONTROL KNOB FOR FRONT RIGHT HOTPLATE
N.B.: the knobs are retractable. Press the knobs in the middle and they pop up.
8. COOKTOP "ON" INDICATOR LIGHT
* The multizone function can only be switched on for the double and triple hotplates of the cooktop. (See cooktop functions
table).
Fig. 3
DISPLAY
1 3 2
for indications regarding this button.
6 7 8
0
0
0
0
GB24
1 ... 10 *
1 ... 10 *
1 ... 10 *
1 ... 10 *