If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, lamp explosion, crash etc.
INSTALLATION
Installing/Replacing the lamp
Before replacing the lamp, unplug mains lead and let the lamp cool down (approx. 5 minutes).
During the installation do not touch the glass-bulbs bare-handed! Please follow the lamp manufacturer's
notes!
Do not install lamps with a higher wattage! Lamps with a higher wattage generate temperatures the device
was not designed for. Damages caused by non-observance are not subject to warranty.
For item no. 51100705
Please do not remove the silicone casing,
rather install the UV-lamp with the casing
to ensure a better fit in the socket.
For the installation, you need for item no.51100705 an UV energy saving lamp 25 W 230 R-7s and for item
no. 51100707 an UV energy saving lamp 50 W 230 V E-40.
During the operation, the lamp reaches temperatures of up to 80° C.
UV/ES illuminants are hazardous waste which needs to be disposed of appropriately.
Please dispose of the unusable UV/ES illuminants in accordance with the current legal regulations.
Procedure:
Step 1: Insert the UV energy.saving lamp in the housing.
Step 2: Insert the protective grill in front of the lamp.
DANGER TO LIFE!
Only install the lamp with the device switched off!
Unplug from mains before!
CAUTION!
The lamp has to be replaced when it is damaged
or deformed due to the heat!
Do not operate this device without protective grill!
14/18
00071497.DOC, Version 1.2