Operation
Teletext
Most TV channels broadcast information via teletext. The index page of the teletext
service (usually page 100) gives you information on how to use the service.
Please use a TV channel with a strong signal, otherwise there may be
Teletext errors.
Switching Teletext on and off
1
Select the TV channel which carries the teletext service you want to view.
2 a
Press the
button once on your remote control to switch Teletext on.
b
Press
again for Mix mode.
The TV broadcast and the Teletext display are overlapped.
;
3
Press
or press
Selecting a Teletext Page
Input the three digits of the page number using the number buttons on your remote
control.
If you have made a mistake:
Type in any three digits, then re-enter the correct page number.
Page Catching
1
Using the number buttons on the remote control, select a teletext page which
has several page numbers on it (e.g. the index page).
2
Press the OK button.
Page Catching is displayed.
3
Select the desired page number using 4 or $ then press the OK button.
The requested page is displayed after some seconds.
Selecting the next or the preceding page
•
Press
(Page +) or
Selecting the index page
•
;
+
Press
.
Selecting a subpage
A teletext page may consist of several subpages. In this case an information line
is displayed, showing the number of subpages.
•
Select the mode by pushing to 4. Select the subpage by using 4 or $.
Freezing a Teletext subpage
1
Press
to freeze the Teletext page.
2
Press
to resume normal teletext reception.
Using Fastext*
*depending on availability of service
Fastext lets you access pages with one button stroke. When Fastext is broadcast,
a colour-coded menu appears at the bottom of the screen. The colours of this
menu correspond to the red, green, yellow and blue buttons on the remote
control.
•
Press the coloured button which corresponds to the colour in the
colour-coded menu.
12
a third time to switch teletext off.
(Page -).
216-02
01
02
03
04
05
06
07
08